Forum Comments

求问哪里能办理英国波恩茅斯大学BU毕业证Q/微603012914【英国学历文凭证书】咨询办理海外大学文凭丨造假英国假毕业证书丨波恩茅斯大学文凭、办理大使馆回国证明Bournemouth University
In Discover Awesome Features
yibocommunal
Feb 15, 2022
Several precautions for installing stainless steel self-priming pump should be kept in mind! The stainless steel self-priming pump has made more changes in function and material in order to discharge gas more smoothly in the self-priming process, and it is also easy to connect the exhaust pipe or valve. However, special attention should be paid during installation to ensure that there will be no instability during operation. 1. Pay attention to stability In order to ensure that the service life of the pump is increased when it is directly connected with the motor. Therefore, when installing and correcting, you must ensure that the installation of the whole pump is stable, including its pump shaft and motor output, which should be on the same shaft degree. 2. Firmly installed When the stainless steel self-priming pump is running, the power is very strong. In order to ensure that the equipment can be used stably, it must be firm between various lock nuts during installation, so as to avoid mechanical failure caused by impeller movement. 3. Storage solution left Although this kind of machine pump does not need to be filled with water, in order to avoid the occurrence of dry friction inside the machine, we must ensure that a certain amount of stored liquid is stored in the pump body. 4. Pipeline installation In order to ensure that this kind of pump can complete a good self-priming process, the maximum height of its suction inlet must not exceed 5m. At the same time, the suction port must be used with the support, so as to reduce the load borne by the pipeline. Of course, there must be no solid sundries in the pipeline, and the filter surface should be checked regularly. 5. The axial deviation shall be controlled within 0.1mm When installing between the shaft device and the shaft device, the maximum deviation of its shaft degree must be controlled, otherwise once the height difference deviates too much, it will lead to instability during the operation of the self-priming pump. Related products: Vacuum Pump Heat Treatment Guide,Heat Treatment Equipment Liquid Ring Vacuum Pump
0
0
yibocommunal
More actions